My Tint

Fat, Grease, Sweat, Dirt caused colour loss.

Remove dirtiness by Mild or Strong Leather Cleaner + Leather Cleaning Brush.
Apply Grease Absorber Spray (10 min turn white)
or Far Absorber Paste (Until it turning white powder) * Repeating

Clean absorbed fat by Leather Cleaning Brush
Solvent/ GLD Cleaner, Sanding Pad * Repeating

Recolouring
Leather Cleaning Spirit, Primer, Colour+ Duller/Gloss, Grainmaker Pressing, Polishing Pad 4000, Top Coat Crosslinker
Or
Leather Fresh Colour (F001 - F046), or Primer, Neutral Binder 70% + Colour 30% + Top Coat Matte/ Gloss 5 - 10%,
Polishing Pad 4000

Professional & Quality

Colour Lock

Dirtiness of Textile & Alcantara Microfiber

Dirtiness of Leather

Cleaning

Fat, Grease, Sweat , Dirt

Fat, Grease, Sweat, Dirt caused colour loss

Pen Ink Mark

Ink Mark, Print or Marking, Tyre Marks

Colour Transfer, Discoloration of Jeans Cloth

Typical Friction, Rubbing Off, Abrasion, Colour Fading

Scuffs and Scratches at bottom leather, Cat Scratches

Crack, Peeling, Flaking, Strong Brittle Leather

Tear, Rips

Hole, Resection for deteriorated leather

Wrinkle, Over Stretching

Dents, Sagging, Pressure Marks

ADD Licker Oil

ADD Metallic Effect

ADD Soft Slip or Wax Slip

ADD Leather Protector+ Leather Shield

ADD Care & Waterproofing Oil

ADD Elephant Preserver

ADD LIP PEOX or Leisol Quiet

Dirtiness of Textile & Alcantara Microfiber Remove dirtiness by Fabric & Alcantara Textile Cleaner mixable water + Leather Cleaning Brush/ Sanding Pad for Alcantara

Dirtiness of Leather Remove dirtiness by Mild or Strong Leather Cleaner + Leather Cleaning Brush

Cleaning COLOURLOCK®’ repair everytime start from cleaning.

Fat, Grease, Sweat , Dirt
Remove dirtiness by Mild or Strong Leather Cleaner + Leather Cleaning Brush. Apply Grease Absorber Spray (10 min turn white) or Fat Absorber Paste (Until it turns white powder) Clean absorbed fat by Leather Cleaning Brush + (If necessary Mild/Strong Leather Cleaner)

Pen Ink Mark
Remove dirtiness by Mild or Strong Leather Cleaner + Leather Cleaning Brush Melt the ink mark by Ball Point Pen Remover, absorb ink with cloth.

Ink Mark, Print or Marking, Tyre Marks, Too wet cleaned perforated leather.
Remove dirtiness by Mild or Strong Leather Cleaner + Leather Cleaning Brush Melt the ink mark by Ball Point Pen Remover, absorb ink with cloth. Apply Grease Absorber Spray (10 min turn white) or Far Absorber Paste (Until it turns white powder) to the damaged area * Repeating Solvent Cleaner/GLD Cleaner, Blocker (apply before Primer) + Sponge + Sanding * Repeating Recolouring Leather Cleaning Spirit, Primer, Colour+ Duller/Gloss, Grainmaker Pressing, Polishing Pad 4000, Top Coat Crosslinker Or Leather Fresh Colour (F001 - F046), or Primer, Neutral Binder 70% + Colour 30% + Top Coat Matte/ Gloss 5 - 10%, Polishing Pad 4000

Colour Transfer, Discoloration of Jeans Cloth, Improper Cleaning Remove the transferred colour by Strong Leather Cleaner + Leather Cleaning Brush Remove by wipping with Solvent/ GLD Cleaner. (Remember to stop the Solvent/ GLD Cleaner reaction by leather protector)

Typical Friction, Rubbing Off, Abrasion, Colour Fading, Decolorization, Yellowing. Strong Detergent caused color loss, colour was rubbed off trying to remove a stain.
Remove dirtiness by Mild or Strong Leather Cleaner + Leather Cleaning Brush Solvent/ GLD Cleaner, Sanding Pad * Repeating Recolouring Leather Cleaning Spirit, Primer, Colour+ Duller/Gloss, Grainmaker Pressing, Polishing Pad 4000, Top Coat Crosslinker Or Leather Fresh Colour (F001 - F046), or Primer, Neutral Binder 70% + Colour 30% + Top Coat Matte/ Gloss 5 - 10%, Polishing Pad 4000

Scuffs and Scratches at bottom leather, Cat Scratches
Remove dirtiness by Mild or Strong Leather Cleaner + Leather Cleaning Brush Solvent Cleaner, Sanding Pad, Leather Glue, Fluid Leather/ Leather Filler + Colour * Repeating Smoothened the leather filler by GLD Pen, Sanding Pad Recolouring Leather Cleaning Spirit, Primer, Colour+ Duller/Gloss, Grainmaker Pressing, Polishing Pad 4000, Top Coat Crosslinker Or Leather Fresh Colour (F001 - F046), or Primer, Neutral Binder 70% + Colour 30% + Top Coat Matte/ Gloss 5 - 10%, Polishing Pad 4000

Crack, Peeling, Flaking, Strong Brittle Leather
Remove dirtiness by Mild or Strong Leather Cleaner + Leather Cleaning Brush Solvent Cleaner, Sanding Pad, Leather Glue, Neutral Binder (apply after Primer)+ Colour, Fluid Leather/ Leather Filler + Colour * Repeating Smoothened the leather filler by GLD Pen, Sanding Pad * Repeating Recolouring Leather Cleaning Spirit, Primer, Colour+ Duller/Gloss, Grainmaker Pressing, Polishing Pad 4000, Top Coat Crosslinker Or Leather Fresh Colour (F001 - F046), or Primer, Neutral Binder 70% + Colour 30% + Top Coat Matte/ Gloss 5 - 10%, Polishing Pad 4000

Tear, Rips
Remove dirtiness by Mild or Strong Leather Cleaner + Leather Cleaning Brush Solvent Cleaner, Sanding Pad, Leather Glue + Backlining Cloth, Fluid Leather/ Leather Filler + Colour * Repeating Smoothened the leather filler by GLD Pen, Sanding Pad * Repeating Recolouring Leather Cleaning Spirit, Primer, Colour+ Duller/Gloss, Grainmaker Pressing, Polishing Pad 4000, Top Coat Crosslinker Or Leather Fresh Colour (F001 - F046), or Primer, Neutral Binder 70% + Colour 30% + Top Coat Matte/ Gloss 5 - 10%, Polishing Pad 4000

Hole, Resection for deteriorated leather
Remove dirtiness by Mild or Strong Leather Cleaner + Leather Cleaning Brush Solvent Cleaner, Sanding Pad, Leather Glue + Backlining Cloth, Plastic Paste/ Vinyl Paste + Colour Smoothened the leather filler by GLD Pen, Sanding Pad * Repeating Recolouring Leather Cleaning Spirit, Primer, Colour+ Duller/Gloss, Grainmaker Pressing, Polishing Pad 4000, Top Coat Crosslinker Or Leather Fresh Colour (F001 - F046), or Primer, Neutral Binder 70% + Colour 30% + Top Coat Matte/ Gloss 5 - 10%, Polishing Pad 4000

Wrinkle, Over Stretching
Not 100% restorable, but Wrinkle and Over Stretching can be reduce. By adding moisture with water and the use of heat, among the heated wrinkle area cooling and Ironing by Chill Bar. * Cautious! High temperature heating will damge the leather.


Typical over-stretched and sagging leather in the driver's seat. These creases develop only after extensive use. Unable to restore only professional trimmer can replace a new leather sheet.

Dents, Sagging, Pressure Marks
Stretch the dents, pull and push from the bottom sagging area by heat blower gun. Pushing the heated sagging area then cooling and Ironing by Chill Bar.

* Badly damaged dents may need to resection and recolouring.

Hot liquid damage, heat damage in the leather, unable to repair burnt leather, only professional trimmer can help.

ADD Licker Oil Too Old Leather, Dry, Hardened, Water Damage, Rain Water Damage, Weathered Leather In a Vintage Car
Repair with Licker Oil * (Days repeating until the leather felt softer.) + Leather Walker pressing and massage to get fiber open and slacken.

ADD Soft Slip or Wax Slip
(Achieve Grip Effects) Apply 3 - 5% to the top coat.

ADD Leather Protector+ Leather Shield
(Prevent Abrasion Damage + Prevent Colour Transfer) Short process - Apply Leather Shield then apply Leather Protector 2 days process - Apply Leather Protector and leave a night then apply Leather Shield.

ADD Care & Waterproofing Oil
(Pigmented Nappa stay Soft and smooth) An intensive conditioning product for clothing and out-door leather. The application is easier than with waxes, especially with clothing. Can spray on the leather.